Case Study: Mining and Mineral Processing – Latin America

Start-up & Commissioning of Two Micronics 1500mm Filter Presses for Leading Zinc Purification Process Plant in Latin America

A leading Latin American metallurgical company needed sophisticated new filter press solutions for its “Hot” and “Cold” Zinc Purification process and turned to Micronics for needed upgrades for their existing zinc purification operation. The client’s zinc purification process is a long-standing installation consisting of multiple filter presses running in-line in a closed loop fashion.

For this client, the pure dilute zinc is the valuable recovered product from the solid-liquid separation process and the filtration process needs to successfully remove all of the impurities from the zinc solution.

Micronics recently partnered with this client to develop, customize, install, and commission two new heavy duty 1500mm filter presses for this demanding 24/7 operation.

Challenge

The zinc purification process is challenging in that there is a low percent solids in the slurry and the formed filter cakes remain wet and thin and do not discharge as easily as other higher solids filter press applications.

The not-very-well-formed filter cakes (typical of low-solids applications) need to be scraped from the filter cloth, washed from the cloth by a low-pressure water hose every cycle, and chemically cleaned every 10 cycles. In addition to these labor-intensive requirements, the filtrate needed to be recirculated to a recovery tank in case of any cloth failures to ensure that the pure filtration achieved targeted quality parameters.

The client needed a replacement filter press solution that first addressed the labor-intensive process of this low percent solids application. Secondly, the filter press solution needed to be addressed in the context of the client’s existing footprint constraints. Micronics’ engineering team had to come up with filter presses of a suitable length to be installed right above the foundations of the filter presses that were being replaced.

Solution

Micronics conducted an in-depth design and site revision analysis to not only address the client’s pain points but to find a solution that would fit the same footprint (size and dimensions) as the old filter presses without affecting the required filtration area. Micronics designed a custom filtration solution that addressed all of the critical process and site requirements.

The Micronics solution incorporated significant Control System customization to ensure complete client satisfaction. This is typical of the Filter Press Solutions that Micronics provides.

Micronics’ technical service team commissioned and installed all of the new equipment for the client’s Zinc Processing facility, which included extensive on-site customization, add-ons, and cycle step modifications. The customer was extremely pleased both with the filter press equipment and the on-site technical service provided during the system commissioning and start-up.

Turn to the Micronics Engineered Filtration Team for all your Liquid Filtration needs for Mining & Mineral Processing throughout Latin America.

Contact Our Experts

Micronics Is Your Trusted Partner for Total Engineered Filtration Solutions. We offer end-to-end solutions from Filter Media to Industry-Leading Filtration Equipment, to Spare Parts & Accessories, to On-Site Field Services and In-House Laboratory Services. Whether for your Filter Press, Belt Press, Leaf Filter, Vacuum Filter, or Baghouse, you can count on Micronics’ deep industry and applications knowledge for the right engineered filtration solution to meet your needs. We look forward to working with your team.

Request a Quote